|
उत्पाद विवरण:
|
| पट्टा की संख्या: | 4 | मोटाई (मिमी): | 0.4-1.2मिमी |
|---|---|---|---|
| चौड़ाई: | 9-19मिमी | उत्पादन क्षमता: | 220-240 किग्रा/एच |
| स्क्रीन परिवर्तक: | स्वचालित या मैनुअल | पेंच मॉडल: | 110/75 मिमी |
| उत्पादन सामग्री: | पीपी पुनर्नवीनीकरण सामग्री | पेंच डिजाइन: | डबल-स्क्रू 110 मिमी 75 मिमी |
| मोटर: | SIMENS | पलटनेवाला: | आईएनवीटी |
| नियंत्रण प्रणाली: | पीएलसी चीनी/अंग्रेजी नियंत्रण प्रणाली | गारंटी: | 1 वर्ष |
| अंतिम उत्पादन: | पीपी कोर-स्पून पैकिंग बेल्ट (2 पट्टियों के लिए 2 मोल्ड) | कुल स्थापना शक्ति: | 80 किलोवाट, (वास्तविक बिजली खपत 40-50%) |
| आवेदन: | चीनी मिट्टी की चीज़ें, फर्नीचर | ||
| प्रमुखता देना: | 75mm PP Strap Manufacturing Machine,110mm PP Strap Manufacturing Machine,INVT Inverter PP Strap Extruder |
||
Double Screw 110mm 75mm PP Strap Manufacturing Machine Ceramics Furniture
Description of PP Sandwich belt band production machine
Sandwich belt equipment is mainly composed of the main machine + auxiliary unit, 2 feeder, 2 barrels, other parts are the same, sandwich belt equipment is mainly used in ceramics factory more, the so-called sandwich belt, is the outer layer is good material, the inner layer is wrapped with bad material.
General parameter of PP strap making machine
|
1 |
Materials |
Polypropylene PP raw material pellets, recycled pellets. |
|
2 |
Product |
PP sandwich belt (2 mould for straps) |
|
3 |
Capacity |
220-240kg/h |
|
4 |
Total install power |
80kw, (actual power consumption is 40-50%) |
|
5 |
Strap width |
5mm-19 mm |
|
6 |
Thickness |
0.4 mm-1.2 mm |
|
7 |
Manpower |
2person/shift |
|
8 |
Workshop required |
L (28m) ×W (2m) ×H (4m) |
|
9 |
Cooling water |
≤20℃,≥0.3Mpa, 5-8Ton/hr |
|
10 |
Compressed air |
0.5-0.8Mpa |
|
11 |
Power source |
380V, 50Hz, 3Phase (according to customer requirement) |
|
12 |
Electric components |
Schneider |
|
13 |
Inverter |
INVT |
|
14 |
Switches |
Fotek |
|
15 |
Motor power |
Gugao |
|
16 |
Machine frame |
100*100*2.5 mm(GB quadrate pipe) |
Advantages of Polypropylene strap production machine
Process flow of PP packing belt production line
① Feeding →② mixing material→③ pre-drying →④ melting and measuring extrusion →⑤ embryo (belt embryo) cooling and forming →⑥ oven pre-heating →⑦ primary stretching →⑧ secondary stretching →⑨ embossing → oven tempering and setting → cooling → finished product winding
Tips: if you have a choose of printing that you can printing first and then embossing in the project of eight.
![]()
FAQ
A: Yes, we provide overseas installation, commissioning, and operator training.
Q: Can 100% recycled material be used?
A: Yes, but the strength will decrease. It is recommended to mix with new material or use for inner layer of sandwich strap.
![]()
व्यक्ति से संपर्क करें: Arey
दूरभाष: +86 17607855313
फैक्स: 86-0755-88219285
कुल मिलाकर रेटिंग
रेटिंग स्नैपशॉट
निम्नलिखित सभी रेटिंग का वितरण हैसभी समीक्षाएँ